How to Lubricate Your Bearings?

How to Lubricate Your Bearings?

If you use a Dexter Hub Cap or other Hub, it is vital to keep the tire bearings happy. Bearing lubrication plays a vital role in bearing life as well as a performance by helping to separate moving parts to minimize friction and prevent wear. Along with providing that separation, it dissipates also frictional heat (preventing overheating and lubricant deterioration) and protects against other known problems such as moisture, corrosion, and any other contaminants.

The Characteristics of Lubricants

Lubricants should have the following features to care for a rolling element bearing:

  • Gives a barrier against contaminants and moisture
  • Well-matched with contiguous components
  • Stable structure to offer a long bearing life
  • Non-corrosive
  • Upholds a stable viscosity over a range of temperatures
  • Good resistance of the film to support loads

Many procedures can be used to apply greases and oils, but there are several standard procedures that are commonly used to supply bearings lubrication.

The grease is usually applied with certain equipment that credits the grease between the balls, forcing it into and around the ball or roller raceway interface. In different oil, grease is usually stated as a percentage, which signifies the real volume of grease compared to the open internal space within the bearing.

The manufacturer typically applies the oil with certain equipment, but the amount added to the bearing is not definite. Use a reliable 21-88 dexter Hub Cap to confirm everything run without a hitch.

Which Process Is Right for Your Application?

Drip Feed Lubrication

Just put, this process usually called a gravity feed method – consists of a roughly covered oil cup or sump placed over the bearing that doses the oil at a set interval. In procedures where small loads as well as low to reasonable speeds are predicted, bearings of this kind need minor amounts of oil that are useful at regular intervals. Also read about Lubrication: Grease or Oil? by clicking here.

This kind of bearing lubrication was applied by hand formerly, however, it really comes with risks such as under or over-lubrication. The drip lubrication method is most generally used for these applications to supply the exact amount of oil at the correct intervals.

Splash Feed Lubrication

With this kind of bearing lubrication, the bearings are splashed with grease by moving parts that are periodically submerged in the lubricating oil. This process is desired when the rotation is not wild sufficient to beat the oil.

A general kind of splash feed lubrication is an oil ring process. This method diminishes the operating temperature of the bearings and is ideal for applications that operate at higher speeds as well as temperatures. Its only downside is that it just works for straight applications because of the dynamics of the oil ring.

Force Feed System

When operating equipment with high speeds and heavy loads, it is necessary to protect the equipment from high temperatures accordingly of friction by delivering a high flow of oil. An oil pump pressurizes the oil in a force-feed lubrication system, which is then absorbed by the component rotating. Examples of methods using this process include boiler feed pumps, gearboxes, compressors, as well as turbine generators. Visit https://www.mdpi.com/2076-3417/9/1/140 to read about On the Innovation Design for Two-Motor Transmissions with Eight-Link Mechanisms in the Electric Vehicles.

Grease Lubrication

Greases are usually used once the lubricant requires to stay in one place or adhere to a part, as well as are perfect because they require less maintenance. Also, they are used once the component cannot be retrieved during operation or can’t be lubricated frequently. Greases are not as easily filtered as oils. But, as they are so viscid, they can’t be constantly pumped through equipment to take away heat.

Now that we have known more about the various kinds of procedures you can apply lubricant, let’s dive into the right application process. Use a reputable Dexter Hub Cap or other hubs to confirm things run smoothly.